3D Printed Wall Planter – Thin Spiral Wave

Description

Rocpots 3D printed wall planters allow you to easily remove and rehang the planter to quickly trim or adjust your plant off the wall. The mounting Plate allows for a quick and easy install only requiring a Philips screwdriver and the included hardware (Mounting instructions can be found here. Our 3D-printed planters are made from UV Resistant corn-based plastic allowing the planter to bask in the sun with your beautiful plant without fading.

Sizing

Small

Outside Dimensions
Depth : 2.76 in / 7 cm
Width : 5.47 in / 13.9 cm
Height : 3.98 in / 10.1 cm

Opening Dimensions
Depth of opening: 2 in / 5.1 cm
Width of opening: 4.75 in / 12.1 cm
Height of opening: 3.9 in / 9.9 cm

Medium

Outside Dimensions
Depth : 3.86 in / 9.8 cm
Width : 7.68 in / 19.5 cm
Height : 5.59 in / 14.2 cm

Opening Dimensions
Depth of opening: 2.9 in / 7.4 cm
Width of opening: 6.6 in / 16.8 cm
Height of opening: 5.4 in / 13.7 cm

Large

Outside Dimensions
Depth : 4.92 in / 12.5 cm
Width : 9.92 in / 25.2 cm
Height : 7.17 in / 18.2 cm

Opening Dimensions
Depth of opening: 3.7 in / 9.5 cm
Width of opening: 8.5 in / 21.6 cm
Height of opening: 6.9 in / 17.6 cm

Notes For Buyer
– Colors in photos are, for example, and will vary slightly in person
– The Colours may slightly vary from pot to pot
– The pots will be inspected for major imperfections before shipment
– Pots do not include Plants
– If there are any changes you would like to have made send me a message
– Instructions for mounting can be found here – https://www.rocpots.ca/wall-pot-mounting-instructions/